Használati útmutató CRUX RVCAD-81B

Olvassa el alább 📖 a magyar nyelvű használati útmutatót CRUX RVCAD-81B (10 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 4.5 felhasználó értékelte átlagosan 4.3 csillagra

Oldal 1/10
- Acvates Reverse camera input in Non MMI Audi vehicles.
- Rear-view camera input.
- Provides three AV Inputs.
- With OE type Dynamic Parking Assistance + PDC.
- -screen display and setup. On
AUDI
2008 - 2014
A4
2008 - 2014
A6
2008 - 2014
Q5
- Works on Audi vehicles with Non MMI systems (no MMI Control Knob behind the gear shier).
1 / 10
rev.0119 17
Connecng the CAN Wires
Connect CAN-H- (Brown+Green-3Pin) of the interface to CAN High (Orange + Brown) of the car HS
Connect CAN-L- (Green-4pin) of the interface to CAN Low (Orange + Green) of the carHS
2 / 10
rev.011917
Connection of LCD Wires
1. Unplug the OE LCD cable from a monitor and connect to the supplied LVDS-IN cable.
Please refer to the photo above The ACC wire should be at the bottom (see arrow) . WARNING: .
2. Connect the other end the original LVDS IN cable to LVDS IN port of the interface. of
3. Connect the supplied LVDS-OUT cable to OEM Monitor and connect the other end to the LVDS OUT
port of the interface.
3 / 10
rev.011917

Termékspecifikációk

Márka: CRUX
Kategória: nincs kategorizálva
Modell: RVCAD-81B

Szüksége van segítségre?

Ha segítségre van szüksége CRUX RVCAD-81B, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek