Használati útmutató CRUX SWRHK-65P

Olvassa el alább 📖 a magyar nyelvű használati útmutatót CRUX SWRHK-65P (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 17 ember találta hasznosnak.

/ 2 PDF

Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.062419

SWRHK-65P

Radio Replacement with Steering Wheel Retention for

HYUNDAI and KIA Vehicles with 24 Pin Connector

1 of 2

RADIO REPLACEMENT

SWC RETENTION

+

R

INTERFACING SOLUTIONS

- Retains factory features in select Hyundai and Kia vehicles while functioning with an aftermarket radio.

- Retains factory 3.5mm Aux Input Jack (if equipped).

- Pre-programmed to retain factory Steering Wheel Controls.

- Includes Hyundai/Kia antenna adapter.

- EIA color coded wiring for easy installation.

PRODUCT FEATURES:

PARTS INCLUDED:

INSTALLATION DIAGRAM:

SWRHK-65P MODULESWRHK-65P HARNESSANTENNA ADAPTERSWC CABLE

24-PIN

Connector

AFTERMARKET

RADIO

SWC

MODULE

illumination (+) Orange

Vehicle Speed Sensor Red/White

Antenna Turn ON Blue

+12V Constant Yellow

+12V ACC Red

Ground Black

Right Front (+) Gray

Right Front (-) Gray/Black

Left Front (+) White

Left Front (-) White/Black

Right Rear (+) Violet

Right Rear (-) Violet/Black

Left Rear (+) Green

Left Rear (-) Green/Black

Audio Signal from 3.5mm Jack Aux-InRed & White RCA

TO FACTORY

HARNESS

12-Pin Black

Connector

3.5MM SWC CABLE

Plug in the 3.5MM SWC cable to the 4-pin port

on the module. See “DIP SWITCH SETTINGS” section.

Note:

Output signal(s) stated above may not cover all Year/Model.

HYUNDAI/KIA ANTENNA

ADAPTOR (Included)

AFTERMARKET

RADIO SELECTOR

(See Chart)

HYUNDAI / KIA TYPE

SWC SETTING

(OFF OFF ON ON)

ON RADIOVEHICLE

1 2 3 4 5 6 7 8

ON RADIOVEHICLE

1 2 3 4 5 6 7 8

4-Pin

Connector

Insulate with tape

if not used

Kenwood / JVC

Termékspecifikációk