Használati útmutató CRUX SWRNS-63U

Olvassa el alább 📖 a magyar nyelvű használati útmutatót CRUX SWRNS-63U (4 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 16 ember találta hasznosnak.

Crux Interfacing Solutions • Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.120120

SWRNS-63U

Radio Replacement with Steering Wheel Control Retention

for Select NISSAN Vehicles

1 of 4

RAD IO RE PLAC EMENT

SWC RE TENTION

+

R

INTERFACING SOLUTIONS

- Retains factory features in select Nissan vehicles while funconing with an aermarket radio.

- Pre-programmed to retain factory Steering Wheel Controls.

- Includes antenna adapter.

PRODUCT FEATURES:

PARTS INCLUDED:

SWRNS-63U Module SWRNS-63U HarnessNSBT-BP (Bluetooth Bypass)

SWC Cable Antenna Adapter

INSTALLATION DIAGRAM:

AFTERMARKET

RADIO

+12V Constant Yellow

+12V ACC Red

Ground Black

Illumination Orange

Not Used Orange/White

Amp Turn On Blue/ White

Right Front (+) Gray

Right Front (-) Gray/Black

Left Front (+) White

Left Front (-) White/Black

Right Rear (+) Violet

Right Rear (-) Violet/Black

Left Rear (+) Green

Left Rear (-) Green/Black

VSS (Vehicle Speed Signal) Brown

Chassis Ground Black

(with Ring Terminal)

TO FACTORY

HARNESS

12-Pin Black

Connector

Brown*

Pink

Blue

BLUE / Power Antenna

*See “Setting the Nissan SWC”

on page 2

4-Pin

Connector

Cap or insulate if

not being used

Kenwood/JVC (BLUE / YELLOW)

Insulate with tape

if not being used

3.5MM SWC CABLE

Plug in the 3.5MM SWC cable to the 4-pin port

on the module. See “DIP SWITCH SETTINGS” section.

ON RADIOVEHICLE

1 2 3 4 5 6 7 8

AFTERMARKET

RADIO SELECTOR

(See Chart)

NISSAN

SWC SETTING

(See Chart on page 2)

ON RADIOVEHICLE

1 2 3 4 5 6 7 8

To aftermarket

radio SWC port

Termékspecifikációk