Használati útmutató Doepfer A-115

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Doepfer A-115 (6 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 5.5 felhasználó értékelte átlagosan 3.5 csillagra

Oldal 1/6
doepfer System A - 100 DIVIDER A-115
1
1. Introduction
Module A-115 (DIVIDER) is a four-way frequency
divider.
The frequency of a signal at the input is halved (half
frequency = first sub-octave), quartered (1/4 frequency
= second sub-octave), and so on.
In this way, the DIVIDER produces four sub-octaves
(F/2 down to F/16).
At the output, the A-115 produces a summed mix of
the original and the four sub-octaves. There are at-
tenuators to control the amount (ie. Amplitude) of the
original signal and each of the sub-octaves.
Bear in mind that the sub-octaves output by the A-115
are all true square waves. If you put, eg., a sawtooth
into the Divider, it changes it into a square wave before
the frequency division takes place (using the Schmitt-
Trigger system, if you’re interested). At the output,
therefore, there are always four square waves and the
original signal available.
Audio In
F / 2
Audio
Out
F / 8
A-115
DIV IDER
F / 4
F / 16
Orig.

Termékspecifikációk

Márka: Doepfer
Kategória: nincs kategorizálva
Modell: A-115

Szüksége van segítségre?

Ha segítségre van szüksége Doepfer A-115, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek