Használati útmutató Doepfer A-178

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Doepfer A-178 (8 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 12 ember találta hasznosnak és 6.5 felhasználó értékelte átlagosan 4.6 csillagra

Oldal 1/8
doepfer System A - 100 Theremin A-178
1
1. Introduction
Module A-178 (Theremin Voltage Source) produces
a variable control voltage which gets bigger the
closer your hand gets to its antenna.
You can use this control voltage in any modulation or
control process, and thus have access to an extra
system of real-time control in the synthesis process.
You use the Offset control to set the null point (zero)
of the control voltage output. Two LEDs give a visual
indication of the voltages produced.
The module also produces a gate signal at the gate
output: the signal goes "high" as soon as a voltage is
sensed which is above the threshold set with the
Threshold control. An LED gives a visual indication
of the presence of a gate signal.
This gives you the ability to produce a gate signal
simply by moving your hand.
A-178
Theremin Volt. Source
Antenna
Threshold
+
-
CV Out
Gate Out
Offset

Termékspecifikációk

Márka: Doepfer
Kategória: nincs kategorizálva
Modell: A-178

Szüksége van segítségre?

Ha segítségre van szüksége Doepfer A-178, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek