Használati útmutató Elro AS80PR11

Elro Biztonság AS80PR11

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Elro AS80PR11 (4 oldal) a Biztonság kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 4.5 felhasználó értékelte átlagosan 4.2 csillagra

Oldal 1/4
1
AS80PR11
PIR Motion Detector
Installation Instructions
General Introduction
This Detector is designed with a Passive Infra-Red (PIR) sensor and light sensor in
order to fulfill the purpose of security and home automation. It detects motion by
monitoring changes in infra-red radiation levels emitted by body heat.
2.
Prepare a CR123A battery. Do not insert the battery into the unit yet.
3.
Log into the ELRO Smart Home Alarm account from a web browser.
4.
Select “System” then “Add a Device”.
Product Overview
LED
(hidden
behind
PIR lens)
LED Indication
PIR Lens
Tamper Switch
/ Link Key
Battery
Fixing Screw
5.
Select “PIR Detector”.
Red LED
Used to indicate trigger events, low battery power, and warm up
Green LED
Used to indicate key learning controls
Orange LED
Used to indicate no codes learned
Binding
1. Undo and remove the fixing screw from the bottom of the detector. Carefully
pull the bottom of the detector away from the rear cover and then slide down to
release the top clips.
6.
The following screen will appear. This means the gateway is entering binding
mode.

Termékspecifikációk

Márka: Elro
Kategória: Biztonság
Modell: AS80PR11

Szüksége van segítségre?

Ha segítségre van szüksége Elro AS80PR11, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek