Használati útmutató Joranalogue Cycle 5

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Joranalogue Cycle 5 (6 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 16 ember találta hasznosnak.

CYCLE 5

VARI-

WAVE OSCILLATOR

1

INTRODUCTION

A small oscillator that packs a punch: that’s the

best way to summarise Cycle 5.

At its heart lies a refined high-stability triangle

core voltage controlled oscillator (VCO), with

performance matching or exceeding that of

much bigger and costly oscillator modules.

Instead of a coarse frequency knob, a 7-position

octave switch is provided. This in combination

with a perfect fifth transposition switch and

factory pitch tuning, makes Cycle 5 an

exceptionally straightforward and musical VCO

to use: simply centre the fine tune knob, and the

module will be instantly tuned to reference C.

Meanwhile, its dual precision volt per octave

inputs add a great deal of versatility. For example,

one could be used for pitch sequencing and the

other as a generic exponential FM input, or both

sequenced together for transposition effects—

the dual inputs serving -as a builtin precision

adder.

Sporting all the classic waveforms, ranging from

sine wave, triangle, sawand square/saw, as well

as a hard sync input and low frequency oscillator

(LFO) mode, Cycle 5 makes for a real workhorse

VCO. The novel trigonometric waveshaper results

in a very clean sine wave, ideal for sub bass duty.

Cycle -5’s highlight however, is its variwave

feature. By adjusting the vari-wave knob, the

waveform on the matching output will smoothly

morph from sine, to triangle, saw, square and

finally a very narrow pulse. The vari-wave

parameter can be CV controlled, up to audio

frequencies for some intense timbres.

Equally at home as a modest modulation

companion to big VCOs, as being in the spotlight

in miniature or polyphonic systems, Cycle 5

might just be the most multitalented tiny -

analogue oscillator yet.

CONTENTS

In the Cycle’ll 5 box, youfind:

Product card, stating serial number and

production batch.

16--10-topin Eurorack power cable.

Mounting hardware: two black M3 x 6 mm

hex screws, two black nylon washers and a

hex key.

T 5 he Cyclemoduleitself, in a protective

cotton bag.

If any of these items are missing, please contact

your dealer or support@joranalogue.com.

Termékspecifikációk