Használati útmutató Mount-It! MI-2757

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Mount-It! MI-2757 (5 oldal) a Lapos panel támogatás kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 5.5 felhasználó értékelte átlagosan 4.4 csillagra

Oldal 1/5
FREESTANDING MONITOR ARM
WITH HEIGHT ADJUSTMENT
MI-2757
Scan this QR code for
product information, videos,
and assembly assistance.
Thank you for choosing Mount-It
2
Mount-It!
Mount-It!
Mount and Accessories
4
• Connect the Stand Base (#B) to the bottom of the Stand Arm (#A) using the Bolts (#C) and tighten until
secure using the 4mm Hex Wrench (#D)
Connect the Base and Arm
Step 1 Step 3
• Select the appropriate size mounting bolt (#M-A or M-B) and washer (#M-C) for your monitors mounting
holes and verify the length of the VESA bolt is not too long. If you are unsure of the correct bolt size for
your display refer to your monitor user manual or contact the monitor manufacturer for sizing information.
• Partially install the top 2 VESA bolts, leaving a gap of approximately 0.1” between the monitor and the
back of the bolt head.
Attach the Monitor
Step 2

Termékspecifikációk

Márka: Mount-It!
Kategória: Lapos panel támogatás
Modell: MI-2757

Szüksége van segítségre?

Ha segítségre van szüksége Mount-It! MI-2757, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Lapos panel támogatás Mount-It!

Útmutatók Lapos panel támogatás

Legújabb útmutatók Lapos panel támogatás