Használati útmutató Projecta HDBT200

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Projecta HDBT200 (4 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/4
P/No. HDBT200
Tray Fitting Instructions to suit Auxiliary battery for
Mitsubishi Pajero NM-NW
Years: 2000 onwards
Models: 4M41 DID 3.2 Litre, 6G74 3.5 Litre V6 Petrol
HEAVY DUTY DUAL BATTERY TRAY
2
IMPORTANT SAFETY INFORMATION
Please read this instruction thoroughly before fitting the tray.
This product is recommend to be fitted by a workshop or qualified mechanical person.
WARNINGS
Before installation, make sure that the vehicle is stationary and the wheels chocked.
Be careful when laying wires, not to cause any electrical shorts or wire breakage.
After installation ensure the bonnet can close without hitting the newly installed battery
and battery tray.
SPECIFICATIONS
Max Battery Size (mm) L265x W174 x H220
Max Battery Weight 18Kg
Recommended batteries Exide LCS 24-86 & Century NS70T
Approximate fitting time 2 hours
Special tools None required
Recommended Dual If NW P/n: IDC25
Battery System Other vehicles can fit IDC25, DBC150 or VSR200
Tray Location Engine Bay, Passenger Side near Fire Wall
KIT INCLUDES
Hardware
3 x M6 Bolt
3 x M6 Nut
2 x Body Washer
2 x Weld Bolt
1 x M8 Bolt Long
1 x M8 Nut
Universal
Top Mount
Cruise
Control
Bracket
Tray
J Bolts
1. Make sure that the vehicle is stationary, the engine is switched off and cool.
Disconnect the negative battery terminal from the main battery.
2. Early petrol models had a charcoal canister which will need to be moved to drivers
side and lengthen vacuum hoses (not supplied).
3. Early petrol models will need cruise control relocated to battery with bracket and 2
x weld bolts & M6 nuts provided.
4. Bolt tray using 1 x M6 Bolt to firewall which is captive. 1 X M6 bolt with nut to
drivers side of tray. 1 x M8 nut to stud at front of tray. 1 X M8 bolt and nut to inner
guard with body washer. Will need to partially remove outer guard inner lining to
get to bolt.
5. Fit the battery, J bolts and Universal top mount.
6. Reconnect the negative battery terminal to the main starter battery or install the
desired Dual Battery System. Before closing the bonnet make sure the battery, tray
and J bolts do not hit the bonnet.
For assistance throughout the installation procedure please call our customer service
representatives on 1800 113 443.
3
FITTING INSTRUCTIONS

Termékspecifikációk

Márka: Projecta
Kategória: nincs kategorizálva
Modell: HDBT200

Szüksége van segítségre?

Ha segítségre van szüksége Projecta HDBT200, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Projecta

Projecta

Projecta SC015 Útmutató

2 Október 2024
Projecta

Projecta HDBT200 Útmutató

9 Augusztus 2024
Projecta

Projecta SC320D Útmutató

5 Augusztus 2024
Projecta

Projecta VR020 Útmutató

4 Augusztus 2024
Projecta

Projecta SC220 Útmutató

3 Augusztus 2024
Projecta

Projecta VR005 Útmutató

1 Augusztus 2024
Projecta

Projecta LVD30 Útmutató

31 Július 2024
Projecta

Projecta HDBT252 Útmutató

31 Július 2024
Projecta

Projecta DBC150 Útmutató

29 Július 2024
Projecta

Projecta HDBT108 Útmutató

29 Július 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

MOZA

MOZA SR-P Útmutató

10 Április 2025
CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025