Használati útmutató Thermaltake Pacific SW1 Plus

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Thermaltake Pacific SW1 Plus (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 9 felhasználó értékelte átlagosan 4.5 csillagra

This product is intended for installation only by expert users. Please consult with a qualified technician for installation.

Improper installation may result in damage to your equipment.

Before you start using this product please follow these basic guidelines:

1. Please carefully read through the instruction manual before beginning the installation process.

2. Please remove your graphics card from your motherboard to insure the safest process and in order to prevent any possible

damages to your CPU and motherboard.

3. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant Series.

Scan Here

Installation Guide

Pacific SW1 Plus

AM3/AM2/FM2/FM1

AM5/AM4

a

b

B

AMD

a

b

LGA1700

LGA1200/1156/1155/1151/1150

a

b

a

b

b

a

CC

A

Intel

Ax1

Bx2

Cx1

Dx 4

Fx 4

Gx4

Hx4Ix4

Jx1Kx1

Lx2

Mx1Nx1

Ex4

Water Block

AMD clip

Liquid Metal

Screw

ScrewScrew

Washer

Backplate

ScrewScrew

Parts List

Pinhead

Cotton swabs

Alcohol padsHex Key

Install the pinhead of TG-60.Squeeze certain amount of Liquid

Metal Thermal Grease on the CPU.

(Please wipe it out if overflowed)

Apply the thermal grease evenly

by cotton swabs.

Complete.

J

K

L

a

b

WARNING: Avoid Aluminum Materials

Thermal Grease Application Method

(Black)(Silver)

Termékspecifikációk