Használati útmutató Vemer Energy-230 Micro
Vemer
Mérőberendezések
Energy-230 Micro
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Vemer Energy-230 Micro (2 oldal) a Mérőberendezések kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 4 felhasználó értékelte átlagosan 4.7 csillagra
Oldal 1/2

3
4
1Manuale d’Uso
CONTATORE DI ENERGIA ATTIVA MONOFASE
Leggere attentamente tutte le istruzioni
DIMENSIONI
SCHEMA DI COLLEGAMENTO
DESCRIZIONE
2
Vemer S.p.A.
I - 32032 Feltre (BL) • Via Camp Lonc, 16
Tel +39 0439 80638 • Fax +39 0439 80619
e-mail: info@vemer.it - web site: www.vemer.it
ISCOM037-1706
Mod. Energy-230 Micro
Il contatore statico di energia Energy-230 Micro è un dispositivo in
contenitore 1 modulo DIN per il conteggio di energia attiva nei sistemi
monofase a 230 V AC. Energy-230 Micro è inoltre dotato di uscita impulsi.
Codice Modello Descrizione
VE321600 Energy-230 Micro LCD Contatore energia attiva con uscita impulsi
AVVERTENZE DI SICUREZZA
Durante l’installazione ed il funzionamento del dispositivo è necessario
rispettare le seguenti prescrizioni:
1) Il dispositivo deve essere installato da persona qualificata rispettando
scrupolosamente gli schemi di collegamento.
2) Non alimentare o collegare il dispositivo se qualche parte di esso risulta
danneggiata.
3) Dopo l’installazione deve essere garantita la inacessibilità ai morsetti di
collegamento senza l’uso di appositi utensili.
4) Il dispositivo deve essere installato e messo in funzione in conformità con la
normativa vigente in materia di impianti elettrici.
5) Prima di accedere ai morsetti di collegamento verificare che i conduttori non
siano in tensione.
6) Nell’impianto elettrico a monte del dispositivo deve essere installato un
dispositivo di protezione contro le sovracorrenti.
7) Nella rete di alimentazione deve essere presente una disconnessione
bipolare.
8) Il dispositivo è destinato ad operare in ambienti con categoria di sovraten-
sione III e grado di inquinamento 2 secondo la norma EN 61010-1.
CARATTERISTICHE TECNICHE
• Alimentazione: 230 V AC (-15%/+10%), 50/60 Hz
• Consumo massimo:
− circuito di tensione: 0,7 W
− circuito di corrente: 0,2 W
• Corrente di base: Ib = 5A
• Corrente massima: Imax = 25 A
• Corrente di avviamento: ≤ 20 mA
• Corrente minima: Imin = 25 mA
• Tipo di inserzione: diretta per gli ingressi di corrente
• Led rosso lampeggiante: 2000 lampeggi/kWh
• Precisione: classe 1 (secondo EN 62053-21)
• Contatore elettromeccanico: 5 cifre + 1 decimale
• Risoluzione lettura: 0,1 kWh (fondo scala: 99999,9 kWh)
• Uscita impulsi optoisolata per la lettura remota dei conteggi (morsetti 20 e 21)
• Caratteristiche impulso:
− peso = 2000 impulsi/kWh
− durata ≥ 30 ms
− tensione = 18 ÷ 27 V DC
− massima corrente d’uscita: 27 mA
• Temperatura di funzionamento: -20 ÷ +50 °C
• Temperatura di immagazzinamento: -25°C ÷ +70°C
• Umidità di funzionamento: 20 ÷ 90% non condensante
• Contenitore: 1 modulo DIN
• Grado di protezione: IP20
NORME DI RIFERIMENTO
La conformità alle Direttive Comunitarie:
2014/35/UE (LVD)
2014/30/UE (EMCD)
è dichiarata in riferimento alle seguenti Norme armonizzate:
• EN 61010-1
• EN 62052-11 EN 62053-21
5FUNZIONAMENTO
2
3
1
1. Morsetti per uscita impulsi
2. Led rosso: 2000 lampeggi ogni
1kWh conteggiato (1 lampeggio
ogni 0,5W)
3. Contatore elettromeccanico a
5+1 cifre
• Installare il contatore di energia Energy-230 Micro rispettando scrupolosa-
mente gli schemi di collegamento riportati in questo manuale e sul dispositi-
vo stesso.
• A installazione avvenuta, il contatore registra l’energia attiva. Il LED rosso e
l’uscita impulsi (morsetti 20, 21) emettono un segnale con frequenza
proporzionale all’energia misurata (2000 lampeggi ogni kWh).
18.3
88
45
65.5
60
L
L
1
3
20
21
S0
4
N
6
LOAD

3
4
1
User manual
SINGLE-PHASE ACTIVE ENERGY METER
Read all instructions carefully
DIMENSIONS
WIRING DIAGRAMS
DESCRIPTION
2
Vemer S.p.A.
I - 32032 Feltre (BL) • Via Camp Lonc, 16
Tel +39 0439 80638 • Fax +39 0439 80619
e-mail: info@vemer.it - web site: www.vemer.it
Mod. Energy-230 Micro
The static energy meter Energy 230 Micro is a device in 1 DIN module
container for active energy counting in 230 V AC single-phase systems.
Energy-230 Micro LCD also equipped with pulse output.
Code Model Description
VE321600 Energy-230 Micro Active energy meter with pulse output
SAFETY WARNINGS
During the installation and operation of the device it is necessary to respect
the following instructions:
1) The device should be installed by a qualified operator in according with the
wiring diagrams
2) Do not power or connect the device if any part of it is damaged
3) After the installation inaccessibility to the connection terminals without the
use of special tools must be guaranteed.
4) The device should be installed in conformity to the standards relative to the
electrical system
5) Before touching the connection terminals make sure that the wires are not
live
6) A protection device against over-currents should be installed in the electrical
system, upstream of the energy meter
7) In the supply mains must be present a bipolar disconnection
8) The device is designed to operate in environments with overvoltage
category III and pollution level 2 according to EN 61010-1 standard.
TECHNICAL CHARACTERISTICS
• Power supply: 230 V AC (-15%/+10%), 50/60 Hz
• Maximum power consumption:
− voltage circuit: 0.7 W
− current circuit: 0.2 W
• Basic current: Ib = 5A
• Maximum current: Imax = 25 A
• Starting current: ≤ 20 mA
• Connection type: direct for current inputs
• Minimum current: Imin = 25 mA
• Signaling led red = 2000 flashing at kWh
• Accuracy: class 1 (according to EN 62053-21)
• Electromechanical counter: 5 digits + 1 decimal
• Reading resolution: 0.1 kWh (full scale: 99999.9 kWh)
• Optoinsulated pulse output for energy consumption remote-monitoring (20
and 21 terminals)
• Pulse specifications:
− weight = 2000 flashing at kWh
− duration ≥ 30 ms
− voltage = 18 ÷ 27 V DC
− max current output: 27 mA
• Operating temperature: -20 ÷ +50 °C
• Storage temperature: -25°C ÷ +70°C
• Operating humidity: 20 ÷ 90% non condensing
• Container: 1 DIN
• Protection degree: IP20
REFERENCE STANDARDS
Conformity to the EU directives:
2014/35/EU (LVD)
2014/30/EU (EMCD)
is declared in reference to the following harmonised Standards:
• EN 61010-1
• EN 62052-11 EN 62053-21
5OPERATION
1. Terminals for pulse output
2. Red LED: 2000 ashes every
1kWh counted (1 ash every
0.5W)
3. Electromechanical counter
with 5 + 1 digits counter
2
3
1
ISCOM037-1706
• Install the energy meter Energy-230 Micro according with the wiring
diagrams described in this manual and on the device.
• After installation, the counter records the active energy.
The red LED and the pulse output (terminals 20, 21) emit a signal with
frequency proportional to the measured energy (2000 ashing at kWh).
18.3
88
45
65.5
60
L
L
1
3
20
21
S0
4
N
6
LOAD
Termékspecifikációk
Márka: | Vemer |
Kategória: | Mérőberendezések |
Modell: | Energy-230 Micro |
Szüksége van segítségre?
Ha segítségre van szüksége Vemer Energy-230 Micro, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Mérőberendezések Vemer
2 Október 2024
31 Augusztus 2024
5 Augusztus 2024
28 Július 2024
25 Július 2024
25 Július 2024
20 Július 2024
20 Július 2024
17 Július 2024
13 Július 2024
Útmutatók Mérőberendezések
- Mérőberendezések INFICON
- Mérőberendezések SOEKS
- Mérőberendezések TFA
- Mérőberendezések Hama
- Mérőberendezések TrueLife
- Mérőberendezések Be Cool
- Mérőberendezések Delta Ohm
- Mérőberendezések Fysic
- Mérőberendezések Milwaukee
- Mérőberendezések Technoline
- Mérőberendezések Pico
- Mérőberendezések Bruder Mannesmann
- Mérőberendezések Kern
- Mérőberendezések Tru Components
- Mérőberendezések Camille Bauer
Legújabb útmutatók Mérőberendezések
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025