Használati útmutató Alula RE105

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Alula RE105 (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 12 ember találta hasznosnak.

The Temperature Sensor is used to detect freeze and

overheat conditions. The sensor will alarm when the

temperature trip points are reached.

Features

• Indicates freeze and overheat warnings

• Industry-leading wireless range and battery life

• Secure encrypted wireless transmissions

• 5-year warranty

Enroll the freeze input by placing the panel into wireless

enrollment mode and then sending an enrollment

signal from the sensor.

Options for sending an Enrollment Signal

• Remove the battery tab and cover to trip

tamper.

• To activate and enroll an overheat input,

hold down tamper and install battery.

Install by mounting the sensor in the desired location

using two #4 or #6 screws. An optional cover-securing

screw is included. Alternatively, the sensor can also be

installed using 3M™ VHB™ tape.

Freeze or Heat alarms are transmitted when the

temperature trip points are reached.

Temperature Trip Points

• Heat alarms when over 100°F (38°C)

• Heat restores when under 97°F (36°C)

• Freeze alarms when under 45°F (7°C)

• Freeze restores when over 48°F (9°C)

Pro Tips

3M™ VHB™ Tape works great if the surface is prop-

erly prepared and rm pressure is applied for over 10

seconds.

Surface Preparation

• Clean the surface

• Ensure the mounting surface temperature is above 50°F

Use the panel installation guide to verify proper system setup.

Mounting Screw Holes

RE105 Temperature Sensor

Interlogix

®

Compatible

I

N

S

T

A

L

L

G

U

I

D

E

I

Cover-Securing Screw Hole

Resolution Compatibles

Termékspecifikációk