Használati útmutató Alula RE219

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Alula RE219 (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 20 ember találta hasznosnak és 10.5 felhasználó értékelte átlagosan 4.3 csillagra

Oldal 1/2
Use the panel installation guide to verify proper system setup.
The Home Disaster is an integrated environmental sensor
that detects ood and extreme temperature conditions.
Features
Titanium probes for unmatched corrosion immunity
Detects ood, freeze, and heat conditions
Secure encrypted wireless transmissions
5-year warranty
Enroll by placing the panel into wireless enrollment mode and
then sending an enrollment signal from the sensor.
Install by placing the remote ood probe in the location
requiring ood or leak detection. If desired, the ood
probe can be screwed to the oor or baseboard. Next,
mount the sensor to the wall using the mounting screw
locations. Finally, connect the ood probe wires to the
sensor’s terminal blocks.
Detects water pooled under the sensor and reports extreme
temperature conditions.
Default Temperature Trip Points
Heat alarms when over 100°F (38°C)
Heat restores when under 97°F (36°C)
Freeze alarms when under 45°F (7°C)
Freeze restores when over 48°F (9°C)
RE219 Home Disaster
Honeywell
®
Compatible
I
N
S
T
A
L
L
G
U
I
D
E
I
Mounting
Screw
Holes
Wire
Entry
Hole
Resolution Compatibles
Options for Sending an Enrollment Signal
Remove the battery tab and cover to trip tamper.
Program the loop number:
Loop 1: Heat
Loop 2: Flood
Loop 3: Freeze
Loop 4: Tamper

Termékspecifikációk

Márka: Alula
Kategória: nincs kategorizálva
Modell: RE219

Szüksége van segítségre?

Ha segítségre van szüksége Alula RE219, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek