Használati útmutató Alula RE305

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Alula RE305 (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 17 ember találta hasznosnak és 9 felhasználó értékelte átlagosan 4.9 csillagra

Oldal 1/2
The Temperature Sensor is used to detect freeze and
overheat conditions. The sensor will alarm when the
temperature trip points are reached.
Features
Indicates freeze and overheat warnings
Industry-leading wireless range and battery life
Secure encrypted wireless transmissions
5-year warranty
Enroll the freeze input (ID ending in 0) by placing the
panel into wireless enrollment mode and then sending
an enrollment signal from the sensor.
Options for sending an Enrollment Signal
Remove the battery tab and cover to trip
tamper.
Overheat inputs and reed zones must be enabled to
function. Activate only as needed in order to extend
battery life.
To activate and enroll an overheat input (ID ending in
1):
• Remove magnet from reed switch
• Hold down tamper and install battery
Install by mounting the sensor in the desired location
using two #4 or #6 screws. An optional cover-securing
screw is included. Alternatively, the sensor can also be
installed using 3M™ VHB™ tape.
Freeze or Heat alarms are transmitted when the
temperature trip points are reached.
Temperature Trip Points
Heat alarms when over 100°F (38°C)
Heat restores when under 97°F (36°C)
Freeze alarms when under 45°F (7°C)
Freeze restores when over 48°F (9°C)
Use the panel installation guide to verify proper system setup.
Mounting Screw Holes
RE305 Temperature Sensor
DSC
®
Compatible
I
N
S
T
A
L
L
G
U
I
D
E
I
Cover-Securing Screw Hole
Resolution Compatibles

Termékspecifikációk

Márka: Alula
Kategória: nincs kategorizálva
Modell: RE305

Szüksége van segítségre?

Ha segítségre van szüksége Alula RE305, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek