Használati útmutató Atoll DAC200

Atoll Vevő DAC200

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Atoll DAC200 (8 oldal) a Vevő kategóriában. Ezt az útmutatót 17 ember találta hasznosnak és 9 felhasználó értékelte átlagosan 4.4 csillagra

Oldal 1/8
ATOLL ELECTRONIQUE
OWNER’S MANUAL ~ CONVERTER DAC200 Sig
ATOLL ELECTRONIQUEPage 5Page 4
1) XLR output (Right).
2) Analog output (Right).
3) Analog output (Left).
4) XLR output (Left).
5) Digital output (coaxial).
6) Digital output (optical).
9) Digital input 1 (optical).
10) Digital input 3 (coaxial).
11) Digital input 2 (coaxial).
12) Digital input 1 (coaxial).
13) AES input.
14) USB input (type B).
15) Power plug.
16) Switch ON/OFF.
CONNECTING REMOTE CONTROL
DETAILS OF FUNCTIONS
Reminder: do not make any connections when your device is turned on.
17) Sources selection keys.
18) Filters setup keys (see details beside): selection is made with keys (17).
19) Headphones output (jack 3,5mm) (linking the headphones shut down
the Output signals).
NB : When you connect a headphones, regardless of the BY-PASS
mode, you’ll switch to volume management mode (BY-PASS OFF) in
order to manage the volume level of the headphones.
20) Display: selected source shows on the left and frequency sampling on
the right. When no signal is detected display shows UNLOCK.
21) Volume control keys &
+
(when BY-PASS OFF) from 0 to 80
22) ON/stand-by key.
The remote control is equipped with 2 Lithium CR2025 batteries. This remote control
is also able to drive all others ATOLL’s products: CD players; Tuner; Integrated or
Preamplifier. (See those manuals for details).
23) Volume keys
+
&
(*)
.
24) Standby/ON key.
25) Source selection keys
+
& .
23
24
25
(*)
Volume control is possible only when BY-PASS OFF. When changing the volume, level
is displayed shortly, then the display shows the sampling frequency.
BLUETOOT
FILTERS SETUP
Your appliance allows the reception of audio signals sent since any devices having a
Bluetooth transmitter (Smartphone, tab, computer…).
First time association:
Activate the Bluetooth® connectivity of your emitter device.
Select the Bluetooth® (BT) input of DAC200 Sig: unlock symbol
BT
appears.
Select your appliance on the list of possible receiver (named DAC200 Sig).
Once the connection is made, the lock symbol
BT
appears.
The whole audio signals of your device source will then be transmitted towards your
DAC200 Sig. Your emitter device will remain associated until you unlock the DAC200
Sig with your Smartphone or switch off your amplifier.
Association of another emitter:
To connect another emitter, you’ll need to disconnect the first emitter. The quality
of reception of the signal depends on the power of the Bluetooth emitter and
the distance between the 2 devices.
Avoid being more than 5 meters of your DAC200 Sig for a correct reception without
any risks of signal cuts.
While pressing key (18) you can choose different kinds of digital filters which you can select
with the 17’s keys:
Standard: fast roll-off, minimum phase filter
Fast lin: fast roll-off, linear phase filter
Slow min: soft roll-off, minimum phase filter
Slow lin: soft roll-off, linear phase filter
Apodizing: fast roll-off by apodizing and linear phase filter
Hybrid: fast roll-off and minimum phase filter
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
17 18
19
20 21 22

Termékspecifikációk

Márka: Atoll
Kategória: Vevő
Modell: DAC200

Szüksége van segítségre?

Ha segítségre van szüksége Atoll DAC200, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek