Használati útmutató AXESS AXADCT-4

Olvassa el alább 📖 a magyar nyelvű használati útmutatót AXESS AXADCT-4 (3 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 21 ember találta hasznosnak.

AXADCT-4

INSTALLATION INSTRUCTIONS

REV. 4/27/20

© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION

Integrate • AxxessInterfaces.com

Wire Color & Function: The audio and power input wire colors are an EIA standard for car

stereo applications as follows.

INPUT HARNESS POWER HARNESS

WhiteLEFT Front (+) Input YellowBATTERY +12V Input

White/BlackLEFT Front (-) Input POWER (-) GROUND InputBlack

GrayRIGHT Front + Input REMOTE +12V OutputBlue

Gray/BlackRIGHT Front (-) Input Reference Ground(-)Black/White

GreenLEFT Rear (+) Input

Green/BlackLEFT Rear (-) Input

PurpleRIGHT Rear (+) Input

Purple/BlackRIGHT Rear (-) Input

OUTPUT HARNESS

WhiteLEFT Front (+) Output LEFT Rear (+) OutputGreen

White/BlackLEFT Front (-) Output LEFT Rear (-) OutputGreen/Black

GrayRIGHT Front + Output RIGHT Rear (+) OutputPurple

Gray/BlackRIGHT Front (-) Output RIGHT Rear (-) OutputPurple/Black

Note: Be sure that all audio input connections are polarized or in phase with each other.

That is, the positive output wires from the audio source need to be connected to the

corresponding positive input wires of the AXADCT-4. The same goes for the negative audio

wires. Failure to do this will result in poor bass response and low quality audio.

Adjusting the AXADCT-4 for maximum performance: After completing all of the necessary

connections, turn the AXADCT-4 adjustment pots all of the way down by rotating them

completely counter-clockwise. Now, turn the stereo system on and adjust the main volume

control on the stereo to approximately 3/4 maximum volume. Select one of the adjustment

pots on the AXADCT-4 and turn it slowly clockwise until you notice audio distortion and then

stop. Turn the remaining pots to the same position as the previously adjusted pot. The audio

set-up of the AXADCT-4 is now complete and ready to be enjoyed.

Termékspecifikációk