Használati útmutató AXESS AXLOCM-150

Olvassa el alább 📖 a magyar nyelvű használati útmutatót AXESS AXLOCM-150 (3 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 5 felhasználó értékelte átlagosan 3.9 csillagra

Oldal 1/3
AXLOCM-150
INSTALL ATION I NSTRUCTION S
REV. 12/13/19© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.com
The Line Output Converter (LOC) should be installed on a stereo’s speaker output wires or the output
wires on an OEM amplifier of up to 75 watts per channel. These wires can be found behind the stereo
in the dash, on the outside of an OEM amplifier, or on the input terminals on the OEM speakers.
Wire color and function
The audio input wire colors are an EIA standard for car stereo applications as follows:
Black Ground input
Blue Remote +12v output the above power wires can be connected directly
to the amplifier being added
White Left front (+) input
White/Black Left front (-) input
Gray Right front (+) input
Gray/Black Right front (-) input
Black/White Reference ground (-) (reference ground optional if noise is present)
Note: Be sure that all audio input connections are polarized or in phase with each other. That is, the
positive output wires from the audio source need to be connected to the corresponding positive
input wires of the LOC. The same goes for the negative audio wires. Failure to do this will result in
poor bass response and low quality audio.
Continued on other side
2 Channel Line Output Converter (LOC) with Amp Turn-On

Termékspecifikációk

Márka: AXESS
Kategória: nincs kategorizálva
Modell: AXLOCM-150

Szüksége van segítségre?

Ha segítségre van szüksége AXESS AXLOCM-150, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek