Használati útmutató Festo CAMA-C6-SK-S2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Festo CAMA-C6-SK-S2 (1 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 16 ember találta hasznosnak és 5 felhasználó értékelte átlagosan 5.0 csillagra

Translation of the original instructions

1Further applicable documents

All available documents for the product www.festo.com/pk.è

Observe further applicable documents:

–Instruction manual for the servo drive

–Instruction manual for the motor cable

2Safety

2.1Safety instructions

–Only assemble the product on components that are in a condition to be safely

operated.

–Observe the safety instructions in the instruction manual for the servo drive.

2.2Intended use

–Shield support of the motor cable on the housing of the servo drive

–Strain relief for the connecting cables on the servo drive

3Further information

The approved motor cables are given in the controller accessories5

èwww.festo.com/catalogue.

4Product range overview

4.1Included in delivery

1

O-ring (2x)

2

Shield clamp (1x)

3

Screw (2x)

Fig. 1

4.2Not included in the delivery

4

Servo drive (1x)

CMMT-AS

Fig. 2

5

Motor cable (1x)

è3 Further information

Fig. 3

5Mounting

5.1Assembly of the shield clamp

Fig. 4

1.Place all shields(A) of the motor cable over a large area on the shield5

clamp 1 Further applicable documents.2è

2.Fasten the shield clamp using the screws and the O-rings to the231

servo drive. Tightening torque: 1.8Nm±15%4

5.2Assembly of the strain relief (optional)

Fig. 5

•Relieve the strain on the connecting cables(B) with cable binders(C) at the

cut-outs of the shield clamp.2

8087912

CAMA-C6-SK-S2/-S3

Shield clamp

8087912

2018-04

[8087914]

Instructions| Assembly

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Germany

+49 711 347-0

www.festo.com

Termékspecifikációk