Használati útmutató Festo DHAS-GA-B22-S
Festo
nincs kategorizálva
DHAS-GA-B22-S
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Festo DHAS-GA-B22-S (1 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 5.5 felhasználó értékelte átlagosan 5.0 csillagra
Oldal 1/1

Translation of the original instructions
1 Applicable documents
All available documents for the product www.festo.com/pk.è
Document Product Contents
Instructions Adaptive shape gripper DHEF Operating
Tab. 1
2 Safety
2.1 Safety instructions
– Only assemble the product on components that are in a condition to be safely
operated.
2.2 Intended use
Grip the outside of objects in combination with adaptive shape gripper DHEF
(wearing part).
3 Product range overview
3.1 Scope of delivery
1
Inverting cap (1x)
Fig. 1
3.2 Not in scope of delivery
2
Adaptive shape gripper (1x)
DHEF
Fig. 2
4 Mounting
4.1 Preparation
For replacement:
• Remove old inverting cap from shape gripper instruction manual for theè
adaptive shape gripperDHEF Replacement chapter.è
4.2 Replacing inverting cap
Fig. 3 Remove old inverting cap
1. Loosen knurled nut[B].
2. Separate knurled nut[B], bayonet catch[C], threaded bush[D] and inverting
cap[A].
Fig. 4 Assemble inverting cap
• Pull inverting cap over the threaded bush[D].1
Ä
Sealing rim[E] is seated completely over the collar [F].
Fig. 5 Mount bayonet catch
1. Align rotation lock[X] on the bayonet catch[C] with the spring pin[G].
2. Place bayonet catch[C] on the threaded bush[D].
3. Place knurled nut[B] on the threaded bush and screw on to the stop.
Fig. 6 Mount inverting cap
1. Evert inverting cap .1
Ä
The inside of the inverting cap tip[H] is visible.
2. Press the inverting cap tip[H] into the coupling[J] of the piston rod.
Ä
The releasing ring snaps back audibly.
3. Check that O-ring[K] is undamaged and correctly seated in the slot.
Fig. 7 Close bayonet catch
1. Position bayonet catch[C] on the shape gripper .2
2. Turn bayonet catch[C] as shown by the mark (approx.45°).
Ä
Bayonet catch[C] audibly locks.
8104615
DHAS-GA-B22-S
Inverting cap
8104615
2019-02
[8104617]
Instructions| Assembly
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com
Termékspecifikációk
Márka: | Festo |
Kategória: | nincs kategorizálva |
Modell: | DHAS-GA-B22-S |
Szüksége van segítségre?
Ha segítségre van szüksége Festo DHAS-GA-B22-S, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók nincs kategorizálva Festo
30 Március 2025
30 Március 2025
30 Március 2025
30 Március 2025
30 Március 2025
30 Március 2025
30 Március 2025
30 Március 2025
30 Március 2025
30 Március 2025
Útmutatók nincs kategorizálva
- nincs kategorizálva Saro
- nincs kategorizálva MARTOR
- nincs kategorizálva Blackstar
- nincs kategorizálva Dunlop
- nincs kategorizálva Noma
- nincs kategorizálva XPG
- nincs kategorizálva MiPow
- nincs kategorizálva Karma
- nincs kategorizálva Korona
- nincs kategorizálva Stages
- nincs kategorizálva Mamiya
- nincs kategorizálva Viatek
- nincs kategorizálva Honor
- nincs kategorizálva Lantus
- nincs kategorizálva Kingston Technology
Legújabb útmutatók nincs kategorizálva
10 Április 2025
10 Április 2025
10 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025