Használati útmutató Joy-It RB-LCD5

Joy-It Monitor RB-LCD5

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Joy-It RB-LCD5 (6 oldal) a Monitor kategóriában. Ezt az útmutatót 15 ember találta hasznosnak és 8 felhasználó értékelte átlagosan 3.8 csillagra

Oldal 1/6
Joy-IT powered by SIMAC Electronics GmbH - Pascalstr. 8 - 47506 Neukirchen-Vluyn - www.joy-it.net
5"-TOUCH DISPLAY
RB-LCD-5
5"-TOUCH DISPLAY
RB-LCD-5
1. GENERAL INFORMATION
Dear customer,
thank you very much for choosing our product.
In the following, we will introduce you to what to observe while starting
up and using this product.
Should you encounter any unexpected problems during use, please do
not hesitate to contact us.
These instructions were written under Raspberry Pi OS
Bookworm for the Raspberry Pi 4 and 5. It has not been
checked with newer operating systems or hardware.
i
2. CONNECTION
The display is simply plugged onto the GPIO strip of your Raspberry Pi.
Then take the enclosed HDMI adapter and plug it into the HDMI port of
the display and the HDMI port of your Raspberry Pi. Make sure you use
the HDMI adapter that matches your Pi.
Pi3 Pi4/5
3. INSTALLATION
To install the display, open a terminal window and enter the following
commands in sequence:
sudo rm -rf LCD-show
git clone https://github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show/
sudo ./LCD5-show
Your Raspberry Pi will then restart automatically.

Termékspecifikációk

Márka: Joy-It
Kategória: Monitor
Modell: RB-LCD5

Szüksége van segítségre?

Ha segítségre van szüksége Joy-It RB-LCD5, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek