Használati útmutató Joy-It RB-TFT3.2-V2

Joy-It Monitor RB-TFT3.2-V2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Joy-It RB-TFT3.2-V2 (14 oldal) a Monitor kategóriában. Ezt az útmutatót 14 ember találta hasznosnak és 7.5 felhasználó értékelte átlagosan 5.0 csillagra

Oldal 1/14
3
3.2“ / 3.5“ Touch-Display
for Raspberry Pi
Published: 16.08.2019 Copyright by Joy- IT 2
3.2 / 3.5 Touch-Display
1. Overview
2. Connecon
3. Installing the soware
4. Using the buons
5. Touchscreen calibraon
6. Simultaneous use of LCD and HDMI
7. Informaon- and take back obligaons-
8. Support
TABLE OF CONTENTS
Published: 16.08.2019 Copyright by Joy- IT 3
3.2 / 3.5 Touch-Display
Dear customer,
Thank you very much for choosing our product.
In the following we will show you what has to be observed during commissioning and use. Should you
encounter any unexpected problems during use, please feel free to contact us.
Plug the 3.2"/3.5" TFT display onto the Raspberry Pi so that it is plugged onto the rst 26 pins of the GPIO
connector. Aer that the backlight of the display should already light up.
1. OVERVIEW
3.2“ Display 3.5“ Display
Controller XPT2046
Resoluon 320x240 480x320
Colors 65.536
2. CONNECTION

Termékspecifikációk

Márka: Joy-It
Kategória: Monitor
Modell: RB-TFT3.2-V2

Szüksége van segítségre?

Ha segítségre van szüksége Joy-It RB-TFT3.2-V2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek