Használati útmutató Joy-It SBC-LCD16x2

Joy-It Monitor SBC-LCD16x2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Joy-It SBC-LCD16x2 (9 oldal) a Monitor kategóriában. Ezt az útmutatót 14 ember találta hasznosnak és 7.5 felhasználó értékelte átlagosan 4.3 csillagra

Oldal 1/9
www.joy-it.net
Pascalstr. 8 47506 Neukirchen-Vluyn
16X2 LCD MODULE
I2C serial
1. GENERAL INFORMATION
Dear customer,
Thank you for purchasing our product. In the following, we will show you
which things should be noted during the use.
Should you encounter any unexpected problems, do not hesitate to contact
us
www.joy-it.net
Pascalstr. 8 47506 Neukirchen-Vluyn
2. USE WITH AN ARDUINO
Connecting the display
Connect the display to the pins of your Arduino like shown in the picture
or rather in the chart.
Arduino® Uno 16 x 2 LCD
GND GND
5 V VCC
SDA SDA
SCL SCL
This picture was made in Fritzing.
Note
On the back of the display, besides the connections, there is a potentio-
meter and a jumper.
The potentiometer is used to adjust the contrast of the display and by
removing the jumper, you can permanently turn o the display's
backlight.
www.joy-it.net
Pascalstr. 8 47506 Neukirchen-Vluyn
Installation of the library
Before you can transfer the code example to your Arduino, you must
install first the additional library LiquidCrystal_I2C.
This library allows you an easy and fast usage of the display.
Therefore, open the library manager on your Arduino soware.
Search now in the library manager for the LiquidCrystal_I2C library and
install it.

Termékspecifikációk

Márka: Joy-It
Kategória: Monitor
Modell: SBC-LCD16x2

Szüksége van segítségre?

Ha segítségre van szüksége Joy-It SBC-LCD16x2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek