Használati útmutató Joy-It SBC-OLED01

Joy-It Monitor SBC-OLED01

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Joy-It SBC-OLED01 (7 oldal) a Monitor kategóriában. Ezt az útmutatót 17 ember találta hasznosnak és 9 felhasználó értékelte átlagosan 4.6 csillagra

Oldal 1/7
OLED DISPLAY 128X64
SBC-OLED01
1. GENERAL INFORMATION
Dear customer,
Thank you for purchasing our product. In the following, we will show you
which things should be noted during the use.
Should you encounter any unexpected problems, do not hesitate to
contact us.
2. I2C ADRESSE
On the backside of the OLED display is a resistor, with which you can set
the I2C address of the display to 0x3D. In the delivery state, the display is
accessible via the I2C address 0x3C.
To do change the address, re-solder the resistor marked in the figure.
3. USAGE WITH ARDUINO
3.2 Code example
Before you can transfer the code example to your Arduino using your
Arduino IDE, you must first install the additional libraries Adafruit GFX
Library (released under the BSD License) and Adafruit_SSD1306
(released under the BSD License) from Adafruit.
These libraries allow you to use the display as easily and quickly as pos-
sible. You can search for and install them under
Sketch
Include Library
Manage Libraries
.
You can download our code examples here. You can upload the code to
your Arduino using the Upload button. Make sure that you have selected
Port and Board correctly under
Tools
.
3.1 Connection
OLED Arduino Voltage translator
GND GND GND
VCC 5V VCCb
- 3,3 V VCCa
- A5 B2
SCL - A2
- A4 B1
SDA - A1
i

Termékspecifikációk

Márka: Joy-It
Kategória: Monitor
Modell: SBC-OLED01

Szüksége van segítségre?

Ha segítségre van szüksége Joy-It SBC-OLED01, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek