Használati útmutató Mount-It! MI-307

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Mount-It! MI-307 (5 oldal) a Lapos panel támogatás kategóriában. Ezt az útmutatót 16 ember találta hasznosnak és 8.5 felhasználó értékelte átlagosan 4.4 csillagra

Oldal 1/5
ULTRA-SLIM & HEAVY-DUTY
TV WALL MOUNT
MI-307
Please scan this QR code
to visit the product page.
Thank you for choosing Mount-It
2
Mount-It!
4
Use a stud finder to locate the center of the studs and hold Wall Mount(#A) to the wall in the desired
mounting location.
Place the Bubble Level (#D) centered on the top of the Wall Mount (#A) and ensure that the mount is level.
Mark the center of the studs through the mount as shown.
Remove the Mount from the wall and drill holes in the marked locations using a 3/16 drill bit (4.5mm) to
a depth of 2.2 (55mm).
Hold the Wall Mount (#A) to the wall over the holes, check the level once again, and install the 4 Lag
Screws (#W-A) and Washers (#W-C) then tighten until secure.
Wood Stud Installation Option
Step 1

Termékspecifikációk

Márka: Mount-It!
Kategória: Lapos panel támogatás
Modell: MI-307

Szüksége van segítségre?

Ha segítségre van szüksége Mount-It! MI-307, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Lapos panel támogatás Mount-It!

Útmutatók Lapos panel támogatás

Legújabb útmutatók Lapos panel támogatás