Használati útmutató AXESS AXDIS-MB82

Olvassa el alább 📖 a magyar nyelvű használati útmutatót AXESS AXDIS-MB82 (8 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 14 ember találta hasznosnak.

/ 8 PDF

AXDIS-MB82

INSTALLATION INSTRUCTIONS

AxxessInterfaces.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 4/9/24 INSTAXDIS-MB82

ATTENTION: With the key out of the ignition,

disconnect the negative battery terminal before

installing this product. Ensure that all installation

connections, especially the air bag indicator lights, are

plugged in before reconnecting the battery or cycling

the ignition to test this product.

NOTE: Refer also to the instructions included with the

aftermarket accessory before installing this device.

• AXDIS-MB82 interface

• AXDIS-MB82 harness

• Steering wheel control harness

TOOLS REQUIRED

• Wire cutter • Crimp tool and Connectors

(example: butt-connectors, bell caps, etc.) or

• Solder gun, solder, heat shrink

• Tape • Zip-ties

Mercedes (with MOST 25 amplifier)

Data Interface with SWC2002-2013

Product Info

INTERFACE COMPONENTS

INTERFACE FEATURES

TABLE OF CONTENTS

Applications2 ......................................................

Connections: BLK-AXDIS-MB82 Harness3 .........

Applicable Radios4 ............................................

Steering Wheel Control Chart (SWC)5 ..............

Installing the BLK-AXDIS-MB82 Interface6 ......

Installing the Fiber Optic Cable........................7

Visit for more detailed information AxxessInterfaces.com

about the product and up-to-date vehicle specific applications

• Designed for MOST*25 amplified systems

• Provides accessory power (12-volt)

• Retains audio controls on the steering wheel controls

• Easy to set Dipswitches for SWC configuration

• Provides NAV outputs (parking brake, reverse, and speed sense)

• Micro B USB updatable

Note: Backup Camera not retained if equipped.

*Media Oriented System Transport

Termékspecifikációk