Használati útmutató AXESS AXTC-PO1

Olvassa el alább 📖 a magyar nyelvű használati útmutatót AXESS AXTC-PO1 (4 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 16 ember találta hasznosnak és 5 felhasználó értékelte átlagosan 4.1 csillagra

AXTC-PO1

INSTALLATION INSTRUCTIONS

AxxessInterfaces.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 2/2/24 INSTAXTC-PO1

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS & INSTALLATION ACCESSORIES REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink • Tape • Wire cutter

• Zip-ties

TABLE OF CONTENTS

Connections: LD-SWCX-PO1 HARNESS2 ..................

Programming3 .........................................................

Troubleshooting.....................................................4

Porsche SWC (Steering Wheel Control)

and Data Interface 2010-2016

APPLICATIONS

• Designed for non-amplified

models only

•

Provides accessory power

(12-volt 10-amp)

• Provides wires for multimedia

radios (park brake, reverse,

speed sense)

• Retains audio controls on the

steering wheel

• Designed to be compatible

with all major radio brands

• Auto detects vehicle type, radio

connection, and preset controls

• Ability to dual assign steering

wheel control buttons

• Retains memory settings even

after battery disconnection or

interface removal (non volatile

memory)

• Provides illumination output

•

Retains the factory backup camera

• Micro-B USB updatable

Porsche

9112011-2016 .......................................................

Cayenne2011-2016 .............................................

Macan (958)2015-2016 ......................................

Panamera 2010-2016 ........................................

• AXTC-PO1 interface • AXTC-PO1 harness

• 3.5mm adapter

Product Info

Visit for more detailed information AxxessInterfaces.com

about the product and up-to-date vehicle specific applications.

ATTENTION: With the key out of the ignition, disconnect

the negative battery terminal before installing this

product. Ensure that all installation connections,

especially the air bag indicator lights, are plugged in

before reconnecting the battery or cycling the ignition to

test this product.

NOTE: Refer also to the instructions included with the

aftermarket accessory before installing this device.

Termékspecifikációk