Használati útmutató Mount-It! MI-7919

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Mount-It! MI-7919 (9 oldal) a Lapos panel támogatás kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 3.5 felhasználó értékelte átlagosan 4.3 csillagra

Oldal 1/9
SIT-STAND WORKSTATION
WALL MOUNT
MI-7919
Scan this QR code for
product information, videos,
and assembly assistance.
Thank you for choosing Mount-It
2
Mount-It!
4
Remove the bolt on the top of the VESA Mount (#A) and slide the VESA Plate off the wall bracket.
Prepare the VESA Mount
Step 1
With a stud finder locate the studs and hold the wall bracket from the VESA Mount (#A) on the stud at
the desired height. Using a bubble level to ensure straightness mark the center of the mounting holes as
shown with a pencil.
Use a 3/16 drill bit and drill on the marked locations to a depth of 2.2
Secure the bracket to the wall using Lag Screws (#W-A) and Washers (#W-C). Tighten the screws until
secure.
A. Wood Stud Mounting Option
Step 2

Termékspecifikációk

Márka: Mount-It!
Kategória: Lapos panel támogatás
Modell: MI-7919

Szüksége van segítségre?

Ha segítségre van szüksége Mount-It! MI-7919, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Lapos panel támogatás Mount-It!

Útmutatók Lapos panel támogatás

Legújabb útmutatók Lapos panel támogatás